Stress-induced evolution of anisotropic thermal conductivity of dry granular materials

Various factors, such as the volumetric fraction of constituents, mineralogy, and pore fluids, affect heat flow in granular materials. Although the stress applied on granular materials controls the formation of major pathways for heat flow, few studies have focused on a detailed investigation of its significance with regard to the thermal conductivity and anisotropy of the materials. This paper presents a numerical investigation of the stress-induced evolution of anisotropic thermal conductivity of dry granular materials with supplementary experimental results. Granular materials under a variety of stress conditions in element testing are analyzed by the three-dimensional discrete element method, and quantitative variations in their anisotropic effective thermal conductivity are calculated via the network model and conductivity tensor measurements. Results show that the directional development of contact area and fabric under anisotropic stress conditions leads to the evolution of anisotropy in thermal conductivity. The anisotropy induced in thermal conductivity by shear stress is higher than that induced by compressive stress because shear stress causes more significant changes in microstructural configurations and boundary conditions. The shear-stress-induced evolution of anisotropy between principal thermal conductivities depends on dilatancy as well as shearing mode, and the shear-driven discontinuity localizes the conductivity. Factors involved in the stress-induced evolution and their implications on the thermal conductivity characterization are discussed.     

Effects of natural and calcined poultry waste on Cd, Pb and As mobility in contaminated soil

The reuse of waste materials as soil additives could be a welcome development in soil remediation. The mobility of Cd, Pb and As in a contaminated soil was investigated using natural and calcined poultry wastes (eggshell and chicken bone), CaCO₃ and CaO at different application rates (0, 1, 3 and 5 %). The chemical composition accompanied with mineralogical composition indicated that CaCO₃ and CaO were the major components in natural and calcined eggshells, respectively, while hydroxyapatite (HAP) dominated the natural and calcined chicken bones. The results showed that soil pH tended to increase in response to increasing application rates of all soil additives. The effectiveness of the additives in reducing Cd, Pb and As mobility was assessed by means of chemical extractions with 0.1 N HCl for Cd and Pb or 1 N HCl for As, according to Korean Standard Test (KST) method. Both calcined eggshell and chicken bone were equally effective with CaO or CaCO₃ in reducing the concentration of 0.1 N HCl-extractable Cd from 6.17 mg kg^?1 to below warning level of 1.5 mg kg^?1, especially at the highest application rate. The application of calcined eggshell, CaO and CaCO₃ also decreased the concentration of 0.1 N HCl-extractable Pb from 1,012 mg kg^?1 to below warning level of 100 mg kg^?1. The Pb concentration decreased significantly with an increasing application rate of chicken bone, but remained above warning level even at the highest application rate. On the contrary, natural and calcined chicken bones led to a significant increase in the mobility of As when compared with the control soil. These findings illustrate that calcined eggshell in particular is equally effective as pure chemical additives in stabilizing Cd and Pb in a contaminated agricultural soil. The presence of As in metal-contaminated soils should be taken into consideration when applying phosphate-containing materials as soil additives, because phosphate can compete with arsenate on adsorption sites and result in As mobilization.     

Biomarker responses in caged rockfish (Sebastes schlegeli) from Masan Bay and Haegeumgang, South Korea

The purpose of this study was to compare enzymatic biomarker activities in fish caged at two sites, Masan Bay (contaminated) and Haeguemgang (reference). In the present study, ethoxyresorufin O-deethylase (EROD), brain acetyl cholinesterase (bAChE), muscle acetyl cholinesterase (mAChE) and butyryl cholinesterase (mBChE) in caged rockfish (Sebastes schlegeli) were measured 0, 1, 3, 7, 14, 21 and 30 days after caging. The level of CYP1A mRNA and Protein expression was induced higher in Masan Bay at 1, 3, 7, 14 and 30 days after caging. EROD activity in the caged fish was significantly higher in Masan Bay than in Haeguemgang 3 and 7 days after caging, but not at 14 and 30 days after caging. bAChE activity was significantly inhibited at 7 and 14 days after caging in Masan Bay. However, mBChE activity was not significantly inhibited during the experiment. Taken together, the data suggest that the caged fish were exposed, at least transiently, to CYP1A inducers and ChE inhibitors, which is consistent with our previous observations.     

Frictional sliding in serpentine at very high pressure

Using a new four-channel system for detecting acoustic emissions in a multianvil apparatus, we have assessed the pressure–temperature range for such emissions, as well as the role of dehydration, by deforming samples of extensively serpentinized peridotite. We show that in the absence of dehydration and for samples initially faulted at low pressure, acoustic emissions occurred well outside the expected pressure–temperature field of unassisted brittle failure. Emissions were also detected during and after dehydration of serpentine. Microstructures of post-run specimens revealed fault slip with offsets up to ~ 500 μm, regardless of whether or not dehydration took place. Dehydration appears to effectively stop slip on pre-existing faults and create new ones. Analysis of P-wave travel times from the four sensors confirmed that the acoustic emissions originated within the specimen during fault slip. These observations suggest that earthquakes can be triggered by slip along an existing fault containing serpentine under significantly higher pressure and temperature conditions than previously thought possible without dehydration.     

Disector自动测量及其三维可视化系统

本文介绍了自行开发的解决Diseetor应用问题的计算机图像处理软件系统及关键技术、算法。本系统能依照Disector原理对多层组织细胞的电镜及光镜图像中的目标进行正确的分割,各层之间图像的人工交互及自动配准。针对每个目标的上下层关系实现目标的Disector自动计数及参数计算,并对每个目标进行体数据的提取和三维重建显示,通过切片级表面重建出曲面表面,再借助OpenGL的显示功能把曲面显示出来。使用Disector分析系统对多种粒子(细胞等)进行三维分析,可以简化寻找新出现粒子的过程,克服切片采集过程中的形变,在统计分析之后,立体地观察粒子结构,能够使操作者从繁琐的手工操作中解脱出来。自动统计新出现的粒子。文中同时还给出了用该系统对小白鼠神经细胞个数的Disector分析,肾小球个数统计分析和三维重建显示实例。     

Evaluation of Hydraulic Properties of Aquitards Using Earthquake‐Triggered Groundwater Variation

The hydraulic properties of aquitards are not easily obtained because monitoring wells are usually installed in aquifers for groundwater resources management. Earthquake‐induced crust stress (strain) triggers groundwater level variations over a short period of time in a large area. These groundwater anomalies can be used to investigate aquifer systems. This study uses a poroelastic model to fit the postseismic variations of groundwater level triggered by the Chi‐Chi earthquake to evaluate the hydraulic properties of aquitards in the Jhoushuei River alluvial fan (JRAF), Taiwan. Six of the adopted eight wells with depths of 70 to 130 m showed good agreement with the recovery theory. The mean hydraulic conductivities (K) of the aquifers for the eight wells are 1.62 × 10^?4 to 9.06 × 10^?4 m/s, and the thicknesses are 18.8 to 46.1 m. The thicknesses of the aquitards are 11.3 to 42.0 m. Under the isotropic assumption for K, the estimated values of K for the aquitards are 3.0 × 10^?8 to 2.1 × 10^?6 m/s, corresponding to a silty medium. The results match the values obtained for the geological material of the drilling core and those reported in previous studies. The estimated values were combined with those given in previous studies to determine the distribution of K in the first two aquitards in the JRAF. The distribution patterns of the aquitards reflect the sedimentary environments and fit the geological material. The proposed technique can be used to evaluate the K value of aquitards using inverse methods. The inversion results can be used in hydrogeological analyses, contaminant modeling, and subsidence evaluation.     

Three-dimensional topography corrections of magnetotelluric data

Topographic effects due to irregular surface terrain may prevent accurate interpretation of magnetotelluric (MT) data. Three-dimensional (3-D) topographic effects have been investigated for a trapezoidal hill model using an edge finite-element method. The 3-D topography generates significant MT anomalies, and has both galvanic and inductive effects in any polarization. This paper presents two different correction algorithms, which are applied to the impedance tensor and to both electric and magnetic fields, respectively, to reduce topographic effects on MT data. The correction procedures using a homogeneous background resistivity derived from a simple averaging method effectively decrease distortions caused by surface topography, and improve the quality of subsurface interpretation. Nonlinear least-squares inversion of topography-corrected data successfully recovers most of structures including a conductive or resistive dyke.     

Characteristics and Ecosystem Changes of Marine Algal Communities in Wangdol-cho on the East Coast of Korea

Ocean Science Journal - This study sought to examine the characteristics and patterns of marine algae community changes in Wangdol-cho in order to establish a theoretical basis for the development...     

Investigating the Effects of Different LED Wavelengths on Aggregation and Swimming Behavior of Chub Mackerel (Scomber japonicus)

Ocean Science Journal - Efficient fish aggregation systems are essential for catching chub mackerel (Scomber japonicus), which is a major target of purse seine fisheries in South Korea. To aid the...     

Climate-change driven range shifts of anchovy biomass projected by bio-physical coupling individual based model in the marginal seas of East Asia

Recent studies in the western North Pacific reported a declining standing stock biomass of anchovy (Engraulis japonicus) in the Yellow Sea and a climate-driven southward shift of anchovy catch in Korean waters. We investigated the effects of a warming ocean on the latitudinal shift of anchovy catch by developing and applying individual-based models (IBMs) based on a regional ocean circulation model and an IPCC climate change scenario. Despite the greater uncertainty, our two IBMs projected that, by the 2030s, the strengthened Tsushima warm current in the Korea Strait and the East Sea, driven by global warming, and the subsequent confinement of the relatively cold water masses within the Yellow Sea will decrease larval anchovy biomass in the Yellow Sea, but will increase it in the Korea Strait and the East Sea. The decreasing trend of anchovy biomass in the Yellow Sea was reproduced by our models, but further validation and enhancement of the models is required together with extended ichthyoplankton surveys to understand and reliably project range shifts of anchovy and the impacts such range shifts will have on the marine ecosystems and fisheries in the region.